Laizeske 4.5″ 4K HDMI On-Camera IPS Monitor Overview

The 4.5″ 4K HDMI On-Camera IPS Monitor from Laizeske features a 1280 x 800 resolution, 470 cd/m2 brightness output, and 160° vertical and horizontal viewing angles for viewing detailed content. You can monitor the display via 3.5mm stereo headphone jack. The monitor has both HDMI input and loop-out, allowing it to not only display live signals but also send them out to other monitors simultaneously.

The monitor is powered using 12 VDC input or compatible rechargeable battery with an L-series plate (or optional D28S/D54, LP-E6, and U60 battery plates). It has the ability to display live picture on multiple displays at once while still maintaining the original video quality. Equipped with standard 1/4″ mount points, it can be attached to cameras and rigs. With the 1/4″ hole, you can sit on a table using the built-in kick stand or securely attach it to the top of your camera.

Key Features

Peaking Focus Assist

When the peaking filter is activated, the internal processor displays a colored highlight on the screen where sharp edges appear. It shows red highlight over parts of the monochrome image in focus.

Check Field (Red, Green, Blue, Mono)

Adjust camera color settings using the check field mode, using red, green, blue, or mono pixels to generate the image. Hue and saturation can be adjusted quickly and accurately in this environment.

Pixel-To-Pixel

You can enable the filmmaker to check the image from the 1:1 signal source without scaling.

Center Marker and Safe Marker

Safely set up your shot with composition markers (80%, 85%, 90%, 93%, 96%, and 2.35:1).

Image Flip

This feature allows you to flip the image vertically, horizontally, or vertically and horizontally together.

Other Features