Laizeske 7″ 4K HDMI On-Camera Monitor Overview

The 7″ 4K HDMI On-Camera Monitor from Laizeske has an IPS panel with a 450 cd/m2 brightness output and features a 1920 x 1200 resolution for viewing detailed high-definition content. It can display up to 16.7 million color images with no brightened dot and no streaking. The wide color gamut LCD panel ensures more precise color restoration. With 1/4″ screw hole at the bottom and an included shoe mount adapter, this 7″ monitor can be mounted on a DSLR camera. It can also be installed by the magic arm on Steadicam, DSLR rig, camcorder kit, handheld stabilizer, and a video camera crane. The DR737 monitor can be powered using an DC adapter or lithium batteries. It has a flexible battery system that supports F970 (standard), D28S, D54, and U60 battery plates.

Brightness Histogram

You can use this quantitative tool to check picture brightness. It shows the distribution of brightness in an image as a graph of brightness along the horizontal axis, and a stack of the number of pixels at each level of brightness along the vertical axis.

Embedded Audio Monitoring

The audio level meters provide numerical indicators and headroom levels, generating accurate audio level displays to prevent errors during monitoring. The audio meter is green initially but turns yellow and red when it exceeds -20 and -9 dB respectively.

Peaking Focus Assist

When the peaking filter is activated, the internal processor displays a colored highlight on the screen where sharp edges appear. You can switch the outline color between red, green, and blue, depending on the different tone of the subject.

False Color

The false color filter helps set the camera exposure. As the camera iris is adjusted, elements of the image change color based on the brightness values.

Exposure Function

Used to assist in exposure adjustment in the zebra pattern mode, it is considered overexposed and displays the moving warning lines onto the overexposed areas. It can be adjusted from 1 to 100 IRE.

Check Field (Red, Green, Blue, Mono)

Adjust camera color settings using the check field mode, using red, green, blue, or mono pixels to generate the image. Hue and saturation can be adjusted quickly and accurately in this environment.

Zoom In (4x, 9x, 16x)

Image magnification retains HD signal in any part, an amplification for high-quality close-up.

Anamorphic Mode

The built-in selection of no-squeeze, 1.3x, or 2.0x allows you to use anamorphic lenses or adapters and see the image de-squeezed, even if your camera does not do so in-camera. The 2.0x mag mode magnifies the center of your image, allowing you to check the focus of your scaled image.

Image Flip

This feature allows you to flip the image vertically, horizontally, or vertically and horizontally together.

Nine Grid

You can zoom one of the images to make it full-screen. You can switch the mark color between red, green, blue, white, and black, depending on the different tone of the subject.

Pixel-to-Pixel

You can enable the filmmaker to check the image from the 1:1 signal source without scaling.

Center Marker and Safe Marker

Safely set up your shot with composition markers (80%, 85%, 90%, 93%, 96%, and 2.35:1). You can also switch the mark color between red, green, blue, white, and black.

Ratio Marker (4:3, 13:9, 14:9, 15:9, 16:9, 1.85:1, 2.35:1)

Frame blanking zone includes six levels, from 0-6 (transparent to black).

• IPS panel with 160° viewing angles
• Aluminum housing
• Sunshade
• 17mm thickness
• 3.5mm earphone slot
• Camera mode
• Image freeze function
• Zoom all function
• Color temperature adjustment
• Flat function key design

In the Box

• Laizeske 7″ 4K HDMI On-Camera Monitor
• Mini HDMI Cable
• Sunshade
• Shoe Mount Adapter
• L-Series Battery Plate
• HDMI Plug Lock

Not in the Box

• Batteries & Power Adapter(Not included)